| Keyless Entry System - Wiring Diagram |  |
Installation: Connecting the Keyless Entry System (KES) is not complicated; however, unless you are experienced in doing so, electrical connections should be made by a qualified technician. This unit is intended for use during normal business hours. For after hours security a dead bolt or similar device will be needed.
Manual Open: Allows staff person inside to manually "buzz" the door open so people without codes may enter the building.
Disable Key Switch: Not supplied. Disables the keypad. Prevents the door from being opened after hours. Not necessary if a dead-bolt is used for after hours security. Compatible with standard electric door strikes only. Not for use with magnetic locks (Mag Locks).
Optional Override (Doorbell On/Off) Switch: Not supplied. Disables the announcement bell. Allows the doorbell to be turned off during periods of heavy use.
Door Strike: Not supplied. Diagram assumes an Electric Door Strike with typical Normally Open connection. For Magnetic Locks wiring must be handled appropriately. The door strike, its transformer & wire are not supplied. 14-20 ga. wire is recommended.